7.7Registration7.8Unregister
The procedures described below are the 1Press m key in idle mode, scroll
procedures that you will find in your : to ADVANCE SET and press
handset. The procedures may vary mOK, scroll : to UNREGISTER
according to the handset you want to and press mOK.
register. In this case, please refer to the 2Enter the Master PIN when prompted
manufacturer of the additional handset. and press mOK to confirm.
Additional handsets must be registered to Note
the base unit before you can use them. Up By default, the Master PIN is 0000.
to 6 handsets can be registered to one 3Scroll : to select the handset
base station.number to unregister and press
The Master PIN is required before you mOK.
can register or unregister handsets. A validation tone is emitted to indicate
successful unregistration and the
Notescreen shows UNREGISTERED.
By default, the Master PIN is 0000. Note
1On the base station, press and hold If no action is taken on the handset within
p for approximately 5 seconds. 15 seconds, the unregistration procedure
2On the handset, press m key, will be aborted and the handset returns
scroll : to ADVANCE SET and to idle mode.
press mOK, scroll : to To unregister a handset that does not
REGISTRATION and press mOK.belong to the CD240/245 range, you can
Noteonly use the CD240/245 handset to
If no action is taken on the handset within unregister it.
10 seconds, the registration procedure will
be aborted. If this happens, repeat Step 1.
3Enter the Master PIN when 7.9Change Master PIN
prompted and press mOK to The Master PIN is used for setting call
confirm. barring/baby call number and registration/
Noteunregistration of handsets. The default
By default, the Master PIN is 0000. Master PIN number is 0000. The
4WAITING _ _ is displayed on the maximum length of the Master PIN is 8
screen.digits. This PIN is also used to protect the
Upon successful registration, a settings of your handset. Your handset
validation tone is emitted and the will prompt you whenever the PIN is
handset numbers (1 to 6) will be required.
assigned by the base automatically.
32Advanced settings |
ACEC
