EXTERNAL RECORDING
English
7 If a digital source is selected:
Recording with automatic synchronized start
After the recording process, the CD recorder stops
automatically.
Recording of an entire disc or a track with automatic
start
Note: Recordings from DAT or DCC will automatically stop
after 20 seconds silence.
Important:
� Recording from CD-changers should always be started in
the Auto-Start mode.If an analogue source is selected:
After the recording process, the CD recorder stops after a
� For recording from external CD changers do not use AUX
MANUAL,butAUX TRACKorAUX CD.silence of 20 seconds on the source material.
YTo stop recording manually, press STOP 9 on the set.
1 Make sure that the CDR(W) is absolutely free of scratches
� RECORDINGINPROGRESS goes off.
and dust particles.
2 Press repeatedly AUX to select the input for the externalImportant:
source you want to record from.If you want to play the recorded CDR disc on any
regular CD player, it must first be finalised. See
� AUX DIGITAL is displayed if the digital coaxial
input is selected.finalising discs.
� AUX OPTICAL is displayed if the digital optical input
Finalised CDRW discs play only on CDRW compatible
is selected.
� AUX ANALOG is displayed if the analogue input isCD players.
selected.
3 Press REC TYPE on the set to enter into the recording menu.
4 Rotate ! JOG CONTROL " to select either:
� AUX CD ?: for recording with synchronised start of an
entire disc
� AUX TRACK ?: for recording with synchronised start
of a track
5 Press YES to confirm your selection.
� WAIT is displayed for a few seconds.
� START SOURCE is shown.
Notes:
� If CHECK INPUT is flashing, check the digital
connection.
� If required the recording level can be set first, using the
REC LEVEL key. See ORec Level key� under ORecording
General�.
6 Start playback on the selected source.
� The CD recorder starts to record simultaneously and
recording in progress is shown. The remaining recording
time left of the CDR(W) is displayed.
STEPTEXT TOTAL TRACK TIME TOTAL REMREC TRACK TIME
12 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 +
COMPILE CD TRACK PROG
CDRWCDRWDIGITAL
OPTICALSHUFFLE REPEAT ALL EDIT
ANALOG
RECORD IN PROGRESSFINALIZE ALC
Note: If you start playback on the selected source within a
track, recording starts at the beginning of the next track
or after 2.7 seconds of silence in analogue recordings.
28 |
ACEC
