8 Advanced features
Note: Your handset must have a link with the base unit in order to use any advanced features mentioned in this
section.
Dial mode
Your phone is set to tone dialling. You can switch to pulse dialling if necessary.
1. Press the MENU key.
2. Select SETTINGS and press the OK key.
3. Select DIALMODE and press the OK key. The current setting is displayed.
4. Select TONE or PULSE .
5. Press the OK key to conrm.
Temporary tone dialling in pulse dial mode
If the dialling mode is set to pulseafter taking the line, y ou can press and hold the STAR key to set temporary
tone dialling.d will be displa yed on the screen. All the following digits will be dialled as tones until you hang up.
Flash duration
Your phone comes with 2 factory programmed ash durations. Check with your local service provider if you are not
sure which duration to use.
1. Press the MENU key.
2. Select SETTINGS and press the OK key.
3. Select FLASH and press the OK key. The current duration is displayed.
4. Select FLASH 1 or FLASH 2.
5. Press the OK key to conrm.
Note: This setting is useful when using operator services.accessed with R k The use of some serey +1,vices R
key+2, Key+3 (call waiting, call fwill depend on the ash setting.orward...)
Area code stripping
If the incoming call number contains an area code you entered in this menu, the area code will be removed and the
resulting CID will be displayed.
1. Press the MENU key.
2. Select SETTINGS and press the OK key.
3. Select AREACODE and press the OK key.
4. Enter the area code. It can contain up to 6 digits.
5. Press the OK key to conrm.
18ADVANCED FEATURES19
www.philips.com/faqs/dectwww.philips.com/faqs/dect |