Setup Menu
Reverb Mode1 Press the 34 keys to highlight DIGITAL
The REVERB MODE can stimulate the echo andOUTPUT.
English
frequency response of some particular places to2 Enter its submenu by pressing the 2 key.
make you feel like personally on the place.3 Press the 34 keys to highlight the selected item.
� ALL: Original digital signals output.
� PCM ONLY: If your receiver is PCM-
compatible, or your receiver can not decode
MPEG-2, Dolby Digital, or DTS audio, choose
this option.
4 Press OK.
5 Press the 1 key and return to the DIGITAL
OUTPUT SETUP menu.
1 Press the 34 keys to highlight the REVERB
Note:
MODE.- If DIGITAL OUTPUT is set to ALL, all audio
2 Enter its submenu by pressing the 2 key.
settings except MUTE are invalid.
3 Move the cursor by pressing the 34 keys to
highlight the selected item.
LPCM Output
� OFF: Playback a disc in original sound effect.If you connect the DVD Player to a PCM
4 Press OK.
compatible receiver via the digital terminals, such
5 Press the 1 key to return to the DIGITAL
OUTPUT SETUP menu.as coaxial or optical etc, you may need to adjust
LPCM OUTPUT.
Discs are recorded at a certain sampling rate.
Digital Audio Setup menuThe higher the sampling rate, the better the
In this menu, you can set up the digital audiosound quality.
output signal from the digital terminals, such as
coaxial or optical etc.
1 Press the 34 keys to highlight the LPCM
OUTPUT.
1 Press SYSTEM MENU to enter the SETUP2 Enter its submenu by pressing the 2 key.
menu.3 Move the cursor by pressing the 34 keys to
2 Press the 34 keys to choose the DIGITALhighlight the selected item.
OUTPUT SETUP.� 48K: Playback a disc recorded at the sampling
3 Press OK.rate of 48kHz.
� 96K: Playback a disc recorded at the sampling
Digital Outputrate of 96kHz.
4 Press OK.
5 Press the 1 key to return to the DIGITAL
OUTPUT SETUP menu.
21
01-29 DVD728 Eng2118/03/2003, 4:50 PM3139 246 12921 |
ACEC
