12 Hookups (contOd)
Connecting to a TV and an Amplifier with Coaxial Digital Audio In jacks,
a Mini-Disc Deck or a Digital Audio Tape Deck
lUse a coaxial digital audio cable or an audio optical cable (not supplied) for this connection.
lIf you use the OPTICAL jack, remove the protective cap.
lIf the Disc is recorded in 5.1 channel Dolby Digital Surround, you cannot dub the Disc in digital sound using
a Mini-Disc or Digital Audio Tape Deck.
lSet DOLBY DIGITALand DTS to OFF on the DVD Player. Details are on pages 38-39.If you play a DVD
when the settings are wrong, the sound will be distorted or you may damage the speakers.
VIDEOL/MONOAUDIO1
inR
DVD Player
VIDEO IN
COMPONENT
2VIDEO OUTY
DIGITAL AUDIO OUTS-VIDEO OUTVIDEO OUT AUDIO OUT
Back of TVPCM / BITSTREAM2Cb
(example only)1Cr
OPTICAL COAXIALRL
Back of Amplifier
COAXIAL DIGITAL
AUDIO IN(example only)
1
1
Connect a coaxial digital audio cable to the COAXIAL jack on the DVD Player and to the
COAXIAL DIGITAL AUDIO IN jack on the Amplifier. (Or, you may connect an audio optical cable
to the OPTICAL jack on the DVD Player and to the OPTICAL DIGITAL AUDIO IN jack on the Amplifier.)
2
Connect the supplied yellow video cable to the yellow VIDEO OUT jack on the DVD Player and
to the VIDEO IN jack on the TV. (Or, you may connect an optional component video cable to the COM-
PONENT VIDEO OUT jacks on the DVD Player and to the COMPONENT VIDEO IN jacks on the TV. Or,
you may connect an optional S-Video cable to the S-VIDEO OUT jack on the DVD Player and to the S-VIDEO
IN jack on the TV.)
3
Plug in the AmplifierOs power cord. Turn on the Amplifier and select the Auxiliary IN station.
During Disc playback, you will adjust the volume at the Amplifier. See your Amplifier ownerOs manual for
details.
Helpful Hints
4Y Optical cable (not supplied) may be
Plug in the TVOs power cord. Turn on the TV and set it todamaged when bent at acute angles.
the correct Video In channel. During Audio CD playback, youEnsure cables are coiled
may check the status of the Disc on your TV screen. During DVDin loops with a diameter
Minimum 6 in.
playback, you will watch the program on the TV. See your TVof 6 inches or morein diameter
ownerOs manual for details. when storing them.
Y Use a cable which is 9.8
feet or shorter.
5Y Insert cable plugs firmly into the jacks
Plug in the DVD PlayerOs power cord. Press the POWERwhen making connections.
button to turn on the DVD Player. OHELLO� will appearY If a plug has minor scratches or is
briefly on the DVD PlayerOs display panel. You should see the DVDdirty, clean it with a soft cloth before
logo on the TV briefly. If you do not, check your connections and
inserting it into a jack.
make sure the TV is on the correct channel. If there is no disc in
Y Replace the protective cap on the
the DVD player, Ono DISC� will appear on the display panel.
OPTICAL jack when it is not in use. |
ACEC
