Getting Started
EnglishSetting up Progressive Scan feature7Select {PROGRESSIVE} to {ON}, then OK
to confirm.
(for Progressive Scan TV only)
� The instruction menu appears on the
The progressive scan display twice theTV.
number of frames per seconds than
interlaced scanning (ordinary normal TV
system). With nearly double the number ACTIVATING PROGRESSIVE SCAN:
of lines, progressive scan offers higher1. ENSURE YOUR TV HAS PROGRESSIVE SCAN.
picture resolution and quality.2. CONNECT USING YPBPR (GBR) VIDEO CABLE.
3. IF THERE IS DISTORTED PICTURE
WAIT 15 SECONDS FOR AUTO RECOVERY.
IMPORTANT!
Before enabling the progressive scanOKCancel
feature, you must ensure:
1) Your TV can accept progressive signals,8Press 1 to highlight OK in the menu
a progressive scan TV is required.and press OK to confirm.
2) You have connected the DVD player to
There will be a distorted picture on
your TV using Y Pb Pr (see page 9.)
your TV at this state until you turn
1Turn on your TV.on the progressive scan mode on
2Turn off your TV progressive scan modeyour TV.
or turn on interlaced mode (refer to your9Turn on your TV progressive scan mode
TV user manual.)(refer to your TV user manual.)
3Press POWER on the remote control to� The below menu appears on the TV.
turn on the DVD player.
CONFIRM AGAIN TO USE PROGRESSIVE
4Select the correct Video Input channel.
SCAN. IF PICTURE IS GOOD,
(See page 15).PRESS OK BUTTON ON REMOTE
� The DVD background screen appears
on the TV.OKCancel
5Press SYSTEM MENU.
6Press 2 repeatedly to select {VIDEO0Press 1 to highlight OK in the menu
and press OK to confirm.
SETUP PAGE}.
� The set up is complete now and you
can start enjoy the high quality picture.
- - Video Setup Page - -
TV Type
TV Display
Progressive On
Picture Setting Off
Set Interlace TV Mode
TIPS:To return to the previous menu, press 1.
To remove the menu, press SYSTEM MENU.
16
01-41 DVP3000K_93_RC21626/09/05, 9:53 AM |
ACEC
