Sound and Volume Controls
{SUBWOOFER}
Setting the speakersO channels
ON � when a subwoofer is connected.
You can adjust the delay times (centre
OFF � when no subwoofer is connected.
and surround only) and volume level for
English
individual speakers. These adjustments let{SPEAKER VOLUME} � Volume level
you optimise the sound according to yoursetting for individual speakers (-6dB ~
surroundings and setup.+6dB).
IMPORTANT!- - Speakers Volume Setup - -
The speaker settings only available on
Front Left0dB0
Multi-channel audio outputs.Front Right0dB0
Center0dB0
Subwoofer0dB0
1Press STOP then, press SETUP.Rear Right0dB0
Rear Left0dB0
2Press 2 repeatedly to select {AUDIO
SETUP PAGE}.
{SPEAKER DELAY} � Delay times setting
3Press 34 to highlight {SPEAKER SETUP},
in relation to the listening position/
then press 2.
distance for centre and surround
speakers (1m ~ 10m).
- - Audio Setup Page - -
Analog Output
- - Speakers Distance Setup - -
Digital Audio Setup
Sound Mode
Speaker SetupCenter1.0M
Night ModeSubwoofer1.0M
- - Speaker Setup Page - -Rear Right1.0M
Rear Left1.0M
Front Speakers Large
Center Speaker Small
Rear Speakers
Subwoofer6Press 1 2 to adjust the setting that best
Speakers Volume
suit your surround sound needs.
Speakers Delay
7Press OK to confirm.
4Enter its submenu by pressing 2.
Helpful Hints:
5Press 34 to highlight one of the options
- Use the longer delay time settings when
below at a time, then press 2.
the rear speakers are closer to the listener
{FRONT SPEAKERS, CENTER SPEAKER,than the front speakers.
REAR SPEAKERS}- The test tone will be automatically
OFF � when no speaker is connected.generated to help you judge the sound level
LARGE � when connected speakers canof each speaker.
produce low frequency signals below
120Hz.
SMALL � when connected speakers
cannot produce low frequency signals
below 120Hz.
TIPS: The underlined option is the factory default setting.
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.
39
01-43_DVP3015K_93_eng_RC23927/06/06, 3:27 PM |
ACEC
