DVD Setup Menu Options
EnglishAudio Setup MenuDigital Audio Setup
1In disc mode, press SETUP.The options included in Digital Audio
Setup are: �Digital OutputO and �LPCM
2Press 1 2 to select �Audio SetupO icon.OutputO.
3Press OK to confirm.1In �AUDIO SETUP PAGEO, press 3 4 to
highlight {DIGITAL AUDIO}, then press 2.
GeneralAudioVideoPreference
2Press the 3 4 keys to highlight an option.
- - Speaker Setup Page - -
3Enter its submenu by pressing 2.Downmix
Digital Audio4Press 3 4 to select a setting, then press
OK to confirm your selection.
Digital Output
Set the Digital output according to your
optional audio equipment connection.
� SPDIF Off: Turn off the digital output.
� All: If you have connected your
Setting the DownmixDIGITAL AUDIO OUT to a multi-channel
This options allows you to set the stereodecoder/receiver.
analog output of your DVD Player.� PCM Only: Only if your receiver is
not capable of decoding multi-channel
1In �AUDIO SETUP PAGEO, press 3 4 toaudio.
highlight {DOWNMIX}, then press 2.
Helpful Hints:
STEREO� If DIGITAL OUTPUT is set to �AllO, all
Select this to change channel output toaudio settings except MUTE are invalid.
stereo which delivers sound from only the
two front speakers.LPCM Output
If you connect the DVD Player to a PCM
LT/RT
Select this option if your DVD Player iscompatible receiver via the digital
connected to a Dolby Pro-Logic decoder.terminals, such as coaxial or optical etc,
you may need to adjust �LPCMO.
2Press 3 4 to select a setting, then pressDiscs are recorded at a certain sampling
OK to confirm your selection.rate. The higher the sampling rate, the
better the sound quality.
� 48kHz: Playback a disc recorded at the
sampling rate of 48kHz.
� 96kHz: Playback a disc recorded at the
sampling rate of 96kHz.
TIPS: The underlined option is the factory default setting.
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.
26
01-37_DVP3020_94_Eng_RC22627/06/06, 1:28 PM |
ACEC
