Before Operation - VCR part
Using your DVD+VCR for the very first time
Tuning in a video channel on your
For the following steps we assume that you have just
TV
connected your DVD+VCR for the very first time.
Video channel (RF output channel) is the channel on
To make tuning TV stations an easy task your DVD+VCR
which your TV receives picture and sound signals from the
incorporates the Automatic Channel Memory
DVD+VCR through the RF cable.
System (ACMS).This system will automatically tune,
If you have used a SCART lead you will not have to tunestore TV channels and set the clock (date & time) in your
your TV, simply select the AV channel.The AV channel isDVD+VCR.
already pre-tuned for optimum video playback on your TV.
Make sure that you have correctly installed your
Perform the following steps only if interference appears in1DVD+VCR.
the TV picture after you have moved to a different area orPress 11 to turn on your DVD+VCR.
a new station has started broadcasting in your area, or ifIf the initial Menu Screen doesnOt appear on screen, make
you change the connection from RF connection to AVsure that you have tuned your TV to a video channel. Or if
connection, or vise versa.this is correct it may mean that your DVD+VCR is already
tuned.
Turn on DVD+VCR and TV.
1
Set the vacant position 36 on your TV.
2
ACMS
Press 11on the remote control to enter the standbyPr-12
ACMSOK i
3mode (the clock indicator will be dimmed).
Press and hold CHANNEL 3 or 4 on the DVD+Press OK to start the automatic tuning process.
4VCR for more than 4 secs.2
RF 36 will appear in the DVD+VCR display.01C0200BBC1
02C0300BBC2
The following picture will be displayed on the TV screen.03C0400ITV
SE
Pr-12
ACMSi
RF CHANNEL 36
Programme number TV Station
PR01BBC1
If the picture is snowy, move to step 5. If the picture isPR02BBC2
clean, press 11 on the DVD+VCR to finish.
PR03ITV
PR04CH4
Press CHANNEL 3 or 4 on the DVD+VCR to set
PR05CH5
5the video channel to a vacant position between 22
PR06Satellite
and 68 which is not occupied by any local station in
The TV station shown above may vary according to the
your area.
area you live in.
Note
The RF channel will not change until step 6 has beenPress SETUP to remove the menus from the TV
executed.3screen.
Press 11 to store the new RF video channel into the
6DVD+VCR memory.
Now tune your TV set to the new DVD+VCR RF
channel.
Note
If the TV picture was clear in step 4, do not retune your
TV.
12 |
ACEC
