Maintenance
EnglishCleaning the CabinetCleaning the Heads and the Tape Paths
Use a soft cloth slightly moistened with a mild To ensure good recording and playback quality,
detergent solution. Do not use a solutionclean the heads A, the capstan(s) B, and
containing alcohol, spirits, ammonia or abrasives.pressure roller(s) C after every 50 hours of
tape operation.
Cleaning Discs Use a cotton swab slightly moistened with
When a disc becomes dirty,cleaning fluid or alcohol.
clean it with a cleaning cloth. You also can clean the heads by playing a
Wipe the disc from the centercleaning tape once.
out. Do not wipe in a circular
motion.
Do not use solvents such as
benzine, thinner, commercially
available cleaners, or antistatic spray intended for
analog records.
C B A B C
Cleaning the disc lens
After prolonged use, dirt or dust mayDemagnetizing the heads
accumulate at the disc lens. To ensure good Use a demagnetizing tape available at your
playback quality, clean the disc lens with Philipsdealer.
CD Lens Cleaner or any commercially available
cleaner. Follow the instructions supplied with
cleaner.
Troubleshooting
WARNING
Under no circumstances should you try to repair the system yourself, as this will invalidate the
warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If you
are unable to remedy a problem by following these hints, consult your dealer or service center.
ProblemSolution
CD OPERATION
ONO DISC� is displayed.� Insert a disc.
� Check if the disc is inserted upside down.
� Wait until the moisture condensation at the lens
has cleared.
� Replace or clean the disc, see OMaintenance�.
ODISC NOT FINALIZED� is displayed.� Use a finalized CD-R(W) or CD-R.
30
pg 001-032/P880/37-Eng3012/8/00, 1:54 PM3139 115 20421 |
ACEC
