In the event of a power failure, you can no longer operate the telephone or fax facility. If
switched on again you have to re-enter the current time.
Keep the power plug free and easily accessible. The machine has no power on/off switch, so
the plug is used to switch off the power.
Tone or pulse dialling
Your phone can dial in two different ways. Older telephone systems usually work with pulse dialling, whilst
modern, digital systems use tone dialling. You can change the dialling mode of your fax machine. If you do not
know which method your line uses, contact your telephone company.
Only for UK: Although this equipment can use either loop disconnect or DTMF signalling, only the
performance of the DTMF signalling is subject to regulatory requirements for correct operation. It
is therefore strongly recommended that the equipment is set to use DTMF signalling for access to
public or private emergency services. DTMF signalling also provides faster call set up.
123
456Select function 14 by pressing the function key and then choosing
14 DIAL MODE
789number 14.
FUNCTION
*0#FINEPHOTOBUSYTELTEL/FAX TAM/FAX
OKPress the OK key.DIAL MODE: TONE
FINEPHOTOBUSYTELTEL/FAX TAM/FAX
Press the CURSOR LEFT or CURSOR RIGHT key.DIAL MODE: PULSE
FINEPHOTOBUSYTELTEL/FAX TAM/FAX
OKPress the OK key.PABX? NO
FINEPHOTOBUSYTELTEL/FAX TAM/FAX
OKPress the OK key again if you are operating your fax machine on a1 SET UP
regular PTT line (for connection to a private branch exchange see 2.5).
FINEPHOTOBUSYTELTEL/FAX TAM/FAX
Sometimes it is necessary to send tone dial signals to make use of certain services. If your
telephone system works on pulse dialling, you can still send tone signals by pressing the * or
# key. All numbers are then transmitted in the tone dialling method. As soon as you replace the
handset on the fax machine, your fax machine will switch back to pulse dialling.
- 15 - |
ACEC
