Tuner
Storing and recalling broadcastTuning in strong signals
English
frequencies
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals for
If you press any of the PRESET TUNING buttons
good reception.
you can easily store up to six broadcast frequen-
cies for later recall with the touch of a button.
1 Press LOCAL/BSM to turn local seek tuning
When you find a frequency that you want toon.
Local seek sensitivity (LOC) appears in the dis-
store in memory press a PRESET TUNING but-Espa-ol
ton and hold until the preset number stopsplay.
flashing.
2 When you want to return to normal seek
The number you have pressed will flash in the
PRESET NUMBERindicator and then remain lit.tuning, press LOCAL/BSM to turn local seek
The selected radio station frequency has beentuning off.
stored in memory.
The next time you press the same PRESET TUN-Deutsch
INGbutton the radio station frequency is
recalled from memory.Storing the strongest broadcast
frequencies
Notes
BSM (best stations memory) lets you automati-
Y Up to 12 FM stations, 6 for each of the two FMcally store the six strongest broadcast frequen-
bands, and 6 MW/LW stations can be storedcies under PRESET TUNING buttons 1�6 and
FranŤais
in memory.once stored there you can tune in to those fre-
Y You can also use 5 and to recall radio sta-quencies with the touch of a button.
tion frequencies assigned to PRESET TUNING
buttons. Press and hold LOCAL/BSM for about two
seconds to turn BSM on.
BSM begins to flash. While BSM is flashing the
six strongest broadcast frequencies will be
Italiano
stored under PRESET TUNING buttons in order
of their signal strength. When finished, BSM
stops flashing.
Y To cancel the storage process, press
LOCAL/BSM.
Note
Nederlands
Y Storing broadcast frequencies with BSM may
replace broadcast frequencies you have saved
using PRESET TUNING.
En6 |
ACEC
