Section
Operating this unit02
English
Turning the unit off# Up to 18 FM stations, six for each of the three
FM bands, and six MW/LW stations can be stored
% Press SOURCE and hold until the unitin memory.
turns off.
# Press a or b to recall radio station frequen-
cies.
Tuner
Tuning in strong signals
Listening to the radioLocal seek tuning lets you tune in only those
radio stations with sufficiently strong signals
1 Press SOURCE to select the tuner.
for good reception.
2 Press BAND to select a band.
% Press LOCAL/BSM repeatedly to turn
Press BAND until the desired band is dis-local seek tuning on or off.
played, F1, F2, F3 for FM or MW/LW.
! The FM bands cover different frequency
ranges as below:
F1: 65 MHz to 74 MHzStoring the strongest broadcast
F2, F3: 87.5 MHz to 108 MHzfrequencies
BSM (best stations memory) lets you automa-
3 To perform manual tuning, briefly presstically store the six strongest broadcast fre-
c or d.quencies under preset tuning buttons 1 to 6.
Once stored you can tune in to those frequen-
4 To perform seek tuning, press and holdcies with the touch of button.
c or d for about one second and release.! Storing broadcast frequencies with BSM
The tuner will scan the frequencies until amay replace broadcast frequencies you
broadcast strong enough for good reception ishave saved using buttons 1 to 6.
found.
# You can cancel seek tuning by briefly pressing% Press LOCAL/BSM and hold until the
c or d.BSM turns on.
# If you press and hold c or d you can skip sta-Six strongest broadcast frequencies will be
tions. Seek tuning starts as soon as you releasestored in the order of their signal strength.
the button.# To cancel the storage process, press
LOCAL/BSM.
Storing and recalling broadcast
frequencies
Built-in Player
% When you find a frequency that you
want to store in memory, press one of pre-Playing a disc
set tuning buttons 1 to 6 and hold until the
preset number stops flashing.1 Insert a CD (CD-ROM) into the disc load-
Memorized radio station frequency can be re-ing slot.
Playback will automatically start.
called by pressing the preset tuning button.
En7 |
ACEC
