EFFECT FUNCTIONS (EFFECT PARAMETERS)
EFFECT PARAMETERS
Beat Effect
NameBeat Switch ParameterParameter 1 (TIME dial)Parameter 2
ContentsSetting Range (unit)(MIX/DEPTH dial) contents
1 DELAYSets delay time of 1/8 to 16/1 per 1Sets delay time.1 to 4 000 (ms)Sets balance between original and
beat of BPM time.delay sound.
2 ECHO (*1)Sets delay time of 1/8 to 16/1 per 1Sets delay time.1 to 4 000 (ms)Sets balance between original
beat of BPM time.sound and echo sound.
3 REVERSE DELAYSets delay time of 1/8 to 16/1 per 1Sets delay time.10 to 4 000 (ms)Sets balance between original and
beat of BPM time.delay sound.
4 PANSets time of 1/16 to 16/1 per 1 beat ofSets effect time.10 to 16 000 (ms)Sets balance between original
BPM time for distribution to right/left.sound and effect sound.
5 TRANSSets cut time of 1/16 to 16/1 per 1Sets effect time.10 to 16 000 (ms)Sets balance between original
beat of BPM time.sound and effect sound.
6 FILTERCycle of cutoff frequency shift is setSets cycle for10 to 32 000 (ms)Amount of effect increases when
in unit of 1/4 to 64/1 relative to 1cutoff time shift.dial is turned clockwise.
beat of BPM.
7 FLANGERCycle of flanger shift is set in unitsSets cycle for10 to 32 000 (ms)Amount of effect increases when
of 1/4 to 64/1 relative to 1 beat offlanger effectdial is turned clockwise. When dial
BPM.shift.is turned fully counterclockwise,
only original sound is output.
8 PHASERCycle of phaser effect shift is set inSets cycle for10 to 32 000 (ms)Amount of effect increases when
units of 1/4 to 64/1 relative to 1 beatphase effect shift.dial is turned clockwise. When dial
of BPM.is turned fully counterclockwise,
only original sound is output.
9 REVERB (*1)Amount of reverberation is set fromSets amount of1 to 100 (%)Sets balance between original
1 to 100 %.reverberationsound and effect sound.
effect.
10 ROBOTSets pitch of robot sound effectSets pitch of�100 to +100 (%)Amount of effect increases when
within range of �100 to +100 %.robot sounddial is turned clockwise.
effect.
11 CHORUSCycle of chorus sound waver is setSets cycle of10 to 32 000 (ms)Sets balance of chorus sound.
in units of 1/4 to 64/1 relative to 1chorus sound
beat of BPM.harmonic.
12 ROLL (*2)Effect time is set as 1/16 to 16/1Sets effect time.1 to 4 000 (ms)Sets balance of original sound and
relative of 1 beat of BPM.roll sound.
13 REVERSE ROLL (*2)Effect time is set as 1/16 to 16/1Sets effect time.1 to 4 000 (ms)Sets balance of original sound and
relative of 1 beat of BPM.roll sound.
14 SEND/RETURNNNNSets volume of RETURN input
sound.
(*1) Even if the effect monitor is turned ON, if no sound is output from the channel to the master output, the effect sound will not be heard.
(*2) When effect is disabled (OFF), the effect sound will not be heard, even if monitor is set to effector.
Sound-color effects
NameParameter (COLOR dial)
1 HARMONICSets amount of pitch shift in range of ?6 half-tones. Rotating dial
to right increases pitch shift by +6 half-tones, while rotating to the
left reduces pitch shift by �6 half-tones.
2 SWEEPSets filter's cutoff frequency. Rotating dial clockwise produces
band-pass filter effect; rotating counterclockwise produces notch
filter effect.
3 CRUSHSets amount of crushing of input sound. Rotate dial
counterclockwise to emphasize low-range sounds, and rotate
clockwise to emphasize high-range sounds.
4 FILTERSets cutoff frequency of filter. Rotating dial to right changes high-
pass filter; rotating dial to left changes low-pass filter.
19 |
ACEC
