PIONEER DV-575A Instruction Manual

DV575A WY_Mid.book 40 Z
8
?
?
?
??
?e
?
?xýI
Uxý9=
-p
?
? 
07Initial Settings menu
The new Country code is set and you will return
Note
to the Options menu screen. Note that the new
Country code doesnOt take effect until the next Y Even if you set Audio Output Mode to 5.1
disc is loaded (or the current disc is reloaded).Channel, youOll only get sound from all
speakers when playing a 5.1 channel multi-
channel disc.
DTS Downmix
Y When set to 5.1 Channel, only the front
Y Default setting: Stereo
left/right channels are output from the
AUDIO OUT (2ch) jacks. Change to 2
Initial Settings
Channel if you want to listen to downmixed
Digital Audio OutParental LockStereostereo audio (for example, because you are
Video OutputDVD Playback ModeLt/Rt
listening through the TVOs built-in
LanguageSACD Playback
DisplayDTS Downmixspeakers).
Options
SpeakersY When set to 5.1 Channel there is no digital
output when playing DVD-Audio.
Y If you set to 2 Channel, Dolby Digital, DTS
If youOve selected DTS > PCM in DTS Out on and MPEG audio is mixed down to two
page 34 or 2 Channel in Audio Output Mode on channels so you still hear all the audio
page 40, you can choose the way the signal is recorded on the disc. With DTS encoded
downmixed to PCM audio. Stereo will audio, you can choose how the signal is
downmixed to PCM audio. See DTS
downmix the DTS signal to 2-channel stereo,
Downmix above to change the downmix
whereas Lt/Rt will downmix to a 2-channel
signal compatible with Dolby surround matrix setting.
decoders. (This allows you to hear surround Y Some DVD-Audio discs donOt allow down-
sound if your AV receiver or amplifier has Dolby mixing of audio. These discs always output
Pro Logic capability.)multi-channel audio regardless of the
setting made here.
Audio Output Mode
Y Default setting: 2 Channel
Initial Settings
Digital Audio OutAudio Output Mode2 Channel
Video OutputSpeaker Installation5.1 Channel
LanguageSpeaker Distance
Display
Options
Speakers
If you connected this player to your amplifier
using the 5.1 channel analog outputs (front,
surround, center and subwoofer outs), set this
to 5.1 Channel; if you connected only the
stereo outs, set to 2 Channel.
40
En