DVR-04_EU.book Page 49 Thursday, February 26, 2004 6:49 PM
Recording06
"CH Choose a channel (199, excluding skip Timer recording using the ShowViewa
channels), or one of the external inputs from which to English
programming system
record.
This system makes programming timer recordings very
"Mode Select FINE, SP, LP, EP or AUTO (See Setting
simple. Most TV guides publish ShowView programming
the picture quality/recording time on page 44). If
numbers with their program details. If you want to make
Manual Recording is on, then you can also select the
a timer recording of a program, you just input the
MN setting.
corresponding code. The date, start, stop and channel
"VPS/PDC The VPS/PDC system automatically settings are made automatically. All you have to do is tell
adjusts the recording time so that even if a program the recorder the recording mode, and whether its a
is not running to schedule you wont miss it. For VPS/once-only recording or a regular recording.
PDC to work properly, you must input the correct
announced time and date of the program you want to
record. Up to eight timer recordings can be set with
VPS/PDC on.
Note that VPS/PDC may not work with every station
and that Optimized Recording will not work if VPS/
PDC is on.CLEAR
"Ttl Name Input Optionally, you can enter a name
for the recording up to 32 characters. (Highlight
Program Set then press (cursor down) to access
ENTER
this option.)HOME
MENU
4 After entering all the timer recording
information, highlight �Program setO and press
ENTER.
The timer recording list screen is displayed again. The
timer program you just input appears in the list.
" If Optimized Rec (see Optimized Rec on page 86) is REC MODE
set to On (and VPS/PDC is off), the recorder will
adjust the recording quality to try and fit the
recording on the disc.
"Standby is displayed when the recorder is in timer 1 Press SHOWVIEW to display the ShowView
recording standby.program screen.
You can also access this screen from the Home Menu
"Recording is displayed when a timer recording is in
(press HOME MENU, select Timer Recording, then
progress.
ShowView).
5 To exit the timer recording screen, press HOME
MENU.ShowView
" If you set the timer recording to use VPS/PDC, you
ShowView#3 9 9 2 409 to input
must switch the recorder into standby before the
timer recording is due to start for it to work correctly. Rec ModeMN21REC MODE to change
to change level
For non-VPS/PDC timer recordings there is no need
to switch the recorder into standby.Rec TimesOnceDailyWeeklyto change
VPS/PDCOffto change
Tip
" Stations that use VPS/PDC typically include VPS/" Use the number buttons to enter the ShowView
PDC information in the teletext TV guide pages. programming number. (To clear the last digit
Please refer to these when setting your timer entered, press CLEAR.)
recording." Press REC MODE to change the recording quality
(see also Recording time and picture quality on
page 43 and Setting the picture quality/recording time
on page 44). If Manual Recording is on, then you can
also select the MN setting.
" Use the / (cursor left/right) buttons to select the
Once, Daily or Weekly recording option.
49
En |