DVR-230_UK.book Page 13 Friday, July 1, 2005 11:52 AM
Connecting up02
Connecting to a cable box or satellite receiver
If you have a cable or satellite receiver with a built-in decoder, connect it to this recorder and your TV as shown on this
page. If you are using a separate decoder box for your cable/satellite TV, set up following the instructions on the next
page.
Using the setup on this page you can:
Record any channel by selecting it on the cable box/satellite tuner.
Important
Do not connect this recorder ?through? your VCR, satellite receiver or cable box. Always connect each component
directly to your TV or AV amplifier/receiver.
1 Connect RF antenna cables as shown.
This enables you to watch and record TV channels.
2 Use a SCART cable (not supplied) to connect the
SCART AVAV1YRGB-TV AV connector to a SCART AV connector
CONNECTORANTENNAon your TV.
INThis enables you to watch discs.
3 Use another SCART cable to connect the AV2
(INPUT 1/DECODER) AV connector to a SCART AV
connector on your satellite/cable box.
2TV1
This enables you to record scrambled TV channels.
Note
INANTENNA
CVIDEO OUTOMPONENTOUTPUTAUDIOVIDEOS-VIDEO The diagram shows SCART video connections, but YPBPRRL
OUTDIGITAL OUT
AV 1 cRGB - TVAV 2 (INPUT 1 DECODER)you can alternatively use any of the other audio/video
connections.
1
3 Tip
This recorder has a ?through? function which allows
you to record a TV program from the built-in TV tuner
SCART AVin this recorder while watching a video playing on
CONNECTORANTENNAyour VCR. (To use this feature when the recorder is in
OUTstandby, Power Save must be set to Off?see Power
Cable/Satellite box
Save on page 53).
ANTENNA
IN
1
Antenna/cable TV
wall outlet
13
En |
ACEC
