Connecting the Unit
Connecting the Power Terminal3. Attach lugs to wire ends. Lugs not
supplied.
Y Always use the special red battery and ground
Y Use pliers, etc., to crimp lugs to wires.
wire [RD-223], which is sold separately. Connect
the battery wire directly to the car battery positive
Lug
terminal (+) and the ground wire to the car body.
1. Pass the battery wire from the
Ground wire
engine compartment to the interior
of the vehicle.Lug
Y After making all other connections to the
amplifier, connect the battery wire terminal
Battery wire
of the amplifier to the positive (+) terminal of
the battery.
Fuse (30 A) EngineInterior of
compart-
the vehicle
ment4. Connect the wires to the terminal.
Y Fix the wires securely with the terminal
screws.
Fuse (30 A)Drill a 14 mmGND terminal
Positive terminalhole into thePower terminalSystem remote
vehicle body.
Insert the O-ring rubbercontrol terminal
grommet into the vehicle
body.
System remote
control wire
Ground wire
2. Twist the battery wire, ground wire
and system remote control wire.
Twist
Battery wire
7 |
ACEC
