6 Press CHANNEL UP (�) or DOWN () to select
�MANUALE position ( llllllIIllll ).
7 Press VOLUME UP (�) or DOWN () to start preset.
The tuning sequence will stop when a signal is detected,
if the signal is not the required channel press again the
button to continue
8 Press CHANNEL UP (�) or DOWN () to select
�MEMOE, and press MENU to memorize.MENU
9 Repeat steps 4 to 8 if you wish to preset other channels.
10 Press CHANNEL UP (�) or DOWN () to selectMENU
�EXITE, and press MENU to return to normal screen.
Z Auto Channel Preset
MENU
1 Press MENU to call the MAIN menu screen.
2 Press CHANNEL UP (�) or DOWN () to select �<PR>E,MENU
and press MENU.
3 Press VOLUME UP (�) or DOWN () on the remote
control to start Auto Channel Preset.
All the TV stations in your area that can be received by the TV set are
automatically preset between channels 1 to 99.The screen shows whatever is
on channel 1 when full auto channel preset is finished.
NOTE: To stop Auto Channel Preset, press the MENU button on the remote control.
ZFineTuning
MENU
1 Press MENU to call the MAIN menu screen.
2 Press CHANNEL UP (�) or DOWN () to select
�<PR>E, and press the MENU. MENU
4
ACEC
