Changing the Lens
When changing the lens, use the supplied lens cover stick.
Info
" Before changing the lens turn off the power to the projector and remove the power cord
from the wall outlet.
" Do not attempt to change the lens while the projector is mounted on the ceiling.
1Pull out the carrying handle.Upper half of the
lens cover
2Use the tip of the supplied lens cover stick
2
to push down on the groove on top of the
upper half of lens cover while pulling for-
ward to remove it with your hand.
1
Carrying handle
3To remove the bottom half of the lens cover,
pull it down and towards you.
Lower half of
3
the lens cover
4To remove the lens, hold it in one hand, to
Lens fastener 4
keep it from dropping, while you turn the lens
catch tab
fastener catch tab in the direction of the ar-
rows in the illustration with your other hand.
" If the lens fastener ring is stiff, attach the sup-
plied lock release strap to the catch tab on
the lens fastener ring and pull the strap to turn
it.
5
5Remove the lens.Procedure for loosening the stiff
lens fastener ring
Lock release
Lens fastener
strap
catch tab
-1 |
ACEC
