E5754(EN)4/24.QX3 03.4.25 7:32 PM Page 11
SETTING UP YOUR DVD PLAYER
CC Digital audio connection
You can make this connection using a coaxial digital cable.
DVD Player
LYCRCOMPONENT
DIGITAUDIO OUTALRCVIDEOVIDEO OUTBS-VIDEO
To COAXIALCoaxial digital cable
DIGITAL OUT(commercially available)
jack
Audio equipment with
coaxial digital input jack
DIGITAL IN
To coaxial digital
input jackCOAXIAL
Digital Connection to an MD to Record a CD
Some Audio CDs have a short silent section between musical tracks. When sound from discs such as these is digitally
recorded by connecting the Player directly to a digital recorder (such as an MD player), the music may be recorded continu-
ously and track numbers may be lost.
CC Digital Connection to Audio Equipment or MD Player without a Dolby Digital Decoder
Y Audio CD
Audio CD discs can be transferred digitally to other equipment such as an MD recorder, play the disc as you would
normally with the audio mode set to OL+R� and use the connection shown above. Audio CDOs recorded in the DTS format
cannot be transferred digitally or via analogue.
Y DVD
DVDOs recorded in Dolby Digital (5.1 channel), Dolby surround (Pro Logic), DTS or MPEG Audio cannot be connected
digitally to external recording equipment such as an MD recorder.
It may be possible to record Dolby Digital or MPEG Audio via a digital connection if the DVD player output is set to PCM
and down mix is set to ON (see page 19 OAudio Settings�). Analgue recording is possible but not for DTS recorded audio.
DVD discs with linear PCM audio should play normally.
Playing Dolby Digital (5.1 channel), DTS or MPEG audio
Connecting an amplifier with a Dolby Digital/DTS/MPEG Audio digital surround processor or a Dolby Digital/DTS/ MPEG
Audio surround processor to your PlayerOs coaxial digital jack provides richer and more powerful audio play.
CC Digital connection to a processor or amplifier with a coaxial digital input jack
You can make this connection using a coaxial digital cable.
DVD Player
LYCRCOMPONENT
DIGITAUDIO OUTALRCVIDEOVIDEO OUTBS-VIDEO
To COAXIALCoaxial digital cable
DIGITAL OUT jack(commercially available)
Dolby Digital (5.1 ch)/DTS/
MPEG Audio processor or
DIGITAL IN
amplifier
To coaxial digital
input jackCOAXIAL
NOTES:
Y This connection is not possible if the processor or amplifier to which you want to connect does not have a coaxial digital
input jack.
Y ANALOG AUDIO OUT and AV (TV) of the DVD player are not available on the DTS audio.
HOW TO CONNECT TO A TV WITHOUT AUDIO/VIDEO INPUT JACKS
If your TV does not have RCA type audio and video input jacks it is still possible to connect this DVD player to your TVOs 75-
ohm coaxial antenna terminal using a commercially available Stereo Audio/Video RF Modulator. Connect the audio and
video outputs of the DVD player to the audio and video inputs on the RF Modulator, and then connect the coaxial output of
the RF Modulator (usually marked OTO TV�) to the 75 ohm coaxial antenna terminal on your TV. Follow the instruction sup-
plied with the RF Modulator for more details.
If your TVOs 75 ohm coaxial antenna terminal is already occupied by an antenna or cable box connection, remove that cable
from your TVOs antenna terminal and reconnect it to the coaxial antenna input terminal of the RF Modulator (usually marked
OANT IN�), then connect the RF modulator to your TVOs antenna terminal as described above.
NOTE
Y The picture quality from DVD discs will not be as good if the DVD player is connected to the TVOs antenna terminal
through an RF Modulator.
� 11 �EN |
ACEC
