SD-AT50H
DX-AT50H
ENGLISH
To check the timer setting:Reusing the memorised timer setting:
The timer setting will be memorised once it is entered. To reuse the same setting,
1 Whilst in the timer playback stand-by mode,
perform the following operations.
press the TIMER button.
1 Turn the power on and press the TIMER button.
Set the AV control unit on time if "TIMER STANDBY" does not appear.
2 Within 10 seconds, press the ENTER button.
2 Within 10 seconds, press the or button to select "TIMER CALL", and press After the setting contents are displayed in order, the system is set to the timer play-
the ENTER button. back stand-by mode.
The system returns to the timer playback stand-by mode after the setting con-
Changing the timer setting:
tents are displayed in order.
Turn the power on, and repeat the operation from step 1 in "Setting the timer" (page
47).
When the start time is reached:
Playback starts automatically and the volume increases gradually.Cancelling the timer playback:
Timer playback is cancelled by turning the power on whilst in the timer playback
The timer play indicator flashes.
stand-by mode. The same operation can be performed in the following procedure
without turning the power on.
Timer play indicator1 Press the TIMER button.
"TIMER CANCEL" will appear.
2 Within 10 seconds, press the ENTER button.
Timer playback will be cancelled (the contents of the setting will not be cancelled).
Caution:
"The contents of the setting will be erased if the system is unplugged or a power
failure occurs. In such cases, set the timer again.
"This system cannot set the timer of other equipment.
"When setting the timer playback using the digital tuner, TV or VCR, the connected
equipment should be set to timer playback at the same time.
Note:
The timer operation is disabled with discs containing menus.
- Timer and sleep operation -
When the finish time is reached:Advanced Features
The system is set to the power stand-by mode automatically.
8
E-48
02/8/28SD-AT50H(H)E5.fm |
ACEC
