CARE AND CLEANING
Evaporating pan;
Some household cleaning chemicals may
affect the inside surfaces and plastic shelvesHow to remove/set
resulting in splitting or cracks occurring.Remove the two screws to take the Evaporating
When cleaning all plastic parts inside thispan off. Please pay attention to the safety since
refrigerator, only use diluted dishwashingthe compressor is very hot.
liquid(soapy water). Make sure that all plas-
tic parts are thoroughly rinsed with water
after cleaning.
Compressor
Evaporating pan
1.Remove the shelves and pockets from the cabi-
net and door. Wash them in warm soapy
dishwashing water; rinse in clean water and dry.
Replacing method of the lamp bulb
2.Clean the inside with a cloth soaked in warm
soapy dishwashing water. Then, use cold water1.Unplug the refrigerator first to prevent electric
to wipe off soapy water.shock.
Light cover
3.Wipe the exterior with a soft cloth each time it is2.Remove the light cover.
soiled.3.Replace the lamp bulb
with the same type.
4.Clean the Magnetic door seal with a toothbrush
and warm soapy dishwashing water.
5.Whenever the refrigerator is moved to clean or base E14, MAX 10W, T-20
repositioned, the Evaporating pan should be re-
moved and cleaned.
NOTE:Switching off your refrigerator
Y Do not use polishing powder, benzine, hot wa-If you switch your refrigerator off when you are
ter etc.
going away for an extended period, remove all food,
Y If undiluted detergent is used or soapy water is
clean the interior thoroughly. Remove the power
not wiped off thoroughly, cracking of plastic partscord plug from the power socket and leave all doors
can result.open.
Y Wipe any food oils adhered to plastic compo-
nents as they can cause cracking of the plastic
surface.
7 |
ACEC
