all.book Page 112 Monday, January 19, 2004 1:02 PM
Optional Settings
Setting 31: SEPARATE MODE
If desired, you can have the fax draw a sheet of paper from one of the paper
sources after each fax reception. By loading colored (or large) paper in that
source, each colored sheet drawn will act as a separator that makes it easy to
distinguish where one multi-page document ends and another begins. A
Transaction Report printed after a reception will also be printed from that
paper source to act as a separator sheet. To turn on this function, press 1
and then select the paper source for the separator paper by pressing 1 for
the paper tray or 2 for the paper cassette. After turning on the function, be
sure to load appropriate paper in the selected paper source. To turn off
Seperate mode, press 2 . (Note that the function will turn off automatically if
the selected paper source runs out of paper.)
Note: This setting is only available if your dealer has installed the paper cassette
option.
fInitial setting: 2
Note: If you turn off the Separate Mode setting, Option Setting 16 will
subsequently appear in the display to allow you make an appropriate setting for
cassette selection. If you don?t make a selection, 1:AUTO SELECTION will be
automatically selected.
Note: Settings 32 and 33 are not used.
Setting 34: LANGUAGE SELECT
This setting is used to select the language that appears in the display. Press
1 to select English or 2 to select French.
fInitial setting: 1
Note: Settings 35 through 37 are not used.
Setting 38: PRINT HOLD
Press 1 (YES) to turn on the Print Hold function (see page 95). (Note: A
Print Hold code must be programmed before YES can be selected.) To turn
off the Print Hold function, press 2 (NO), enter the 4-digit Print Hold code,
and press ENTER . (Note: NO cannot be selected if a received fax is being held START/
in memory by the Print Hold function. First print the fax and then turn off Print
Hold.)
fInitial setting: 2 (NO)
112 |
ACEC
