(33�)662??(.,?ýţ??<,:+(@ó?6=,4),9?ůţó?ů÷÷�??ůůý?
Messages and Signals
Messages and Signals
Display messages
ADD PAPER & /Check the printing paper. If the tray is empty, add
shootingPRESS START KEYpaper and then press the START/MEMORY key. If
(alternating messages)there is paper in the tray, make sure it is inserted 9. Trouble-
correctly (take out the stack, align the edges evenly,
and then reinsert it in the tray) and then press the
START/MEMORY key.
CHECK FILM/These alternating messages appear when there is a
CHECK COVER/problem in the print compartment that prevents
CHECK PAPER JAMprinting. Check to see if the imaging film is not loaded
(alternating messages)properly or if it has been used up and needs
replacement. Make sure the operation panel is
completely closed (press down on both sides). If a
paper jam has occurred, clear the jam as explained in
the following section, Clearing Paper Jams.
CHECK PAPER SIZEThe paper size setting is incorrect. Change the paper
size setting as explained on page 16.
DOCUMENT JAMMEDThe original document is jammed. See the following
section, Clearing Paper Jams. Document jams will
occur if you load more than 10 pages at once or load
documents that are too thick (see page 25).
FAX RX IN MEMORYA fax has been received in memory because the
imaging film needs replacement, you have run out of
printing paper, or the paper is jammed. The fax will
print out automatically when the problem is fixed.
FUNCTION MODEThe FUNCTION key has been pressed.
LINE ERRORTransmission or reception was not successful. Press
the STOP key to clear the message and then try
again. If the error persists, see Line Error on page 62.
67 |
ACEC
