ENGLISH
4. Makesure that the tip of the nozzle is dry , then remove a wax guard from the supplied
strip and place it on the tip of the nozzle, adhesive side down.
5. Place the sleeve on the earphone.
FOAM SLEEVE
WAX GUARD
NOZZLE
FIGURE 2: E2c Wax Guard Installation
IMPORTANT: Do not place Wax Guards on sleeves! Wax guards are
intended for use on the tip of the earphone only, otherwise they will not
function properly.
SPECIFICATIONS
E1cE2cE5c
Low mass/Dual low mass/
Transducer TypeDynamic
high energyhigh energy
113.5 dB105 dB122 dB
Sensitivity (at 1kHz)
SPL/mWSPL/mWSPL/mW
Impedance (at 1kHz)29&16&110&
Output ConnectorGold-plated, 3.5 mm (1/8 in.), stereo plug
1.52 m1.57m1.55 m
Cable Length
(60 inches)(62 inches)(61 inches)
Net Weight17 g (0.6 oz)30 g (1 oz)31 g (1.1 oz)
8 |