SELF-DIAGNOSIS FUNCTION
1.Self-diagnosis Function2.Self-diagnosis Display
When problems occur while the unit is operating, the self-diagno-When problems occur while the unit is operating, the counter of
sis function starts working, and displays on the viethe viewfinder or Dis-wfinder or Display window shows a 4-digit display consist-
play window what to do. This function consists of twing of an alphao display;bet and numbers, which blinks at 3.2 Hz. This 5-
self-diagnosis display and service mode display.character display indicates the Orepaired by:�, Oblock� in which
Details of the self-diagnosis functions are provided in the Instrthe problem occurred, and Odetailed code� of the problem.uc-
tion manual.
ViewfinderDisplay window
C : 3 1 : 1 1C : 3 1 : 11
Blinks at 3.2Hz
Display window
C3 1 1 1
Repaired by:BlockDetailed Code
C : Corrected by customerIndicates the appropriateRefer to page 10 and 11.
H : Corrected by dealerstep to be taken.Self-diagnosis Code Table.
E : Corrected by serviceE.g.
engineer31 ....Road the tape.el
32 ....Turn opower again.n
3.Service Mode Display
The service mode display shows up to six self-diagnosis codes shown in the past.
3-1. Display Method
While pressing the OSTOP� key, set the switch from OFF to OVTR or PLAYER�, and continue pressing the OSTOP� key for 5 seconds
continuously. The service mode will be displayed, and the counter will show the backup No. and the 5-charodes.acter self-diagnosis c
ViewfinderDisplay window
[3] C : 3 1 : 1 1
3 C : 3 1 : 11
Lights up
[3] C : 3 1 : 1 1
Backup No.Self-diagnosis Codes
Order of previous errors
Control dial
3-2. Switching of Backup No.
By rotating the control dial, past self-diagnosis codes will be shown in order. The backup No. in the [] indicates the order in which the
problem occurred. (If the number of problems which occurred is less than 6, only the number of problems whicshown.)h occurred will be
[1] : Occurred first time[4] : Occurred fourth time
[2] : Occurred second time[5] : Occurred fifth time
[3] : Occurred third time[6] : Occurred the last time
3-3. End of Display
Turning OFF the power supply will end the service mode display.
Note:The Oself-diagnosis displa� data will be bacyked up by the coin-type lithium battery (CF-69/71 board BH001). When
this coin-type lithium battery is disconnected, the Oself-diagnosis displa� data will be lost byy initialization.
� 6 � |
ACEC
