Problems and remedies (continued)
If the system still does not operate properly after
performing the measures explained on pages 19
and 20, reset the system as follows:
The disc tray does not open and OCD ERR 1� or1Remove the power cord from the wall outlet,
OCD ERR 2� appears.wait for 30 seconds or more, then connect the
YA foreign object is caught in the drive. Removepower cord to the wall outlet again.
it, turn the system off, and turn the system on2Turn off the system and press MEGA BASS, x
again.(stop) and TAPE simultaneously.
All system parameters are reset to their factory
settings.
Tape Deck
The tape does not record.
YNo tape in the cassette compartment.Messages
YThe tab has been removed from the cassette.
The following message may appear in the
YThe tape has reeled to the end.display during operations.
The tape does not record nor play or there is a
NO DISC
decrease in sound level.
YThere is no disc on the disc tray.
YThe heads are dirty. Clean them (see OCleaning
the tape heads� on page 22).TRAY/PROTECT
YThe record/playback heads are magnetized.YThe system is not placed horizontally on a flat
Demagnetize them (see ODemagnetizing the tapeand solid surface.
heads� on page 22).
The tape does not erase completely.
YThe record/playback heads are magnetized.
Demagnetize them (see ODemagnetizing the tape
heads� on page 22).
There is excessive wow or flutter, or the sound
drops out.
YThe capstans or pinch rollers are dirty. Clean
them (see OCleaning the tape heads� on page 22).
Noise increases or the high frequencies are
erased.
YThe record/playback heads are magnetized.
Demagnetize them (see ODemagnetizing the tape
heads� on page 22).
Tuner
Noise is heard.
YAdjust the antennas.
A stereo FM program cannot be received in
stereo.
YPress FM MODE/DIR (FM MODE on the
remote) until OSTEREO MODE � appears in the
display.
GB
20 |
ACEC
