Making a mirror image print
4Press PRINT.
The mirror image is printed.
You can make a mirror image or upside-down mirror
image when you print a picture from video equipment.
Making a mirror image print in the split
You can use this feature with the standard printingprinting mode
(page 20 to 22) and split printing (page 26 to 27).
Set MIRROR IMAGE SELECT to the desired type
before performing the printing procedures in the
Before you begin Printing images from the video equipment (page 26).
1 Turn on the printer and television and set the input
selector of the television to VIDEO. When you use different images
2 Set INPUT SELECT to VIDEO MOTION orYou can change the mirror image type for each split
VIDEO STILL. plane.
Example
1Set MIRROR IMAGE SELECT to the desired type of" Plane 1 and 3: vertically reversed
image reversal." Plane 2 and 4: horizontally reversedMaking Various Prints
Vertically
reversed
Horizontally
reversed
(mirror image)Horizontally
Vertically reversedreversed
(upside-down image)
No reversalTo change the mirror image type for each split plane,
(original image)change the MIRROR IMAGE SELECT setting each time
before you press CAPTURE.
2Start playback on the video equipment.
While the INPUT indicator lights up, the playbackWhen you use the same image
picture appears on the screen (input picture).The same mirror image in the split planes is printed.
3Press CAPTURE when the picture you want to
print appears on the screen.
The selected picture appears. When you set
MIRROR IMAGE SELECT to V or H, R
(reversed) mark appears on the lower right of the
screen.
Note
You cannot make a mirror: Indicates an upside-down
image print when youmirror image.
want to print the image in: Indicates a mirror image.
the floppy disk.
30GBMaking Various PrintsMaking Various Prints31GB
Making a label for a floppy disk
3 Repeat step 2 to select images for the other 2
thumbnails.
You can make a label for a floppy disk by using the4 Press CAPTURE if you want to check the
sticker-type print paper.actual print image.
The selected image is printed as large picture on oneTo display multiple print images, press V or v.
label, and 3 thumbnail images with lines are printed on
the other label. The total number of images is printedThe first
at the bottom left of the label.selected image
The second and
Before you beginthird selectedimages
1 Turn on the printer and television and set the inputTotal images
selector of the television to VIDEO. Date (when set
2 Set INPUT SELECT to FD. to print)
3Insert the sticker type paper into the printer, then
1Select (FD label print) using the print modepress PRINT.Making Various Prints
dial.The print indicator flashes while printing, and the
label for the floppy disk is printed.
You can use each part of the label for the floppy
disk. Cut the paper so it fits the label side.
FD label printCancelling the selection
Move the white frame to
the image you want to
2Select the image for printing.cancel the selection and
press ENTER. The blue
1 Insert the floppy disk into the floppy disk slot.frame disappears and the
2 Press the arrow buttons to move the whiteselection is canceled.
frame to the image you want to print, thenTo remove the all selected
press ENTER.images, press CLEAR
ALL.
The selected image is placed on the upper halfPerform printing
When printing the inputof the print and the leftmost of the thumbnailprocedures from the
image from the videoon the lower half.beginning.
equipment
You cannot make a labelNote
for a floppy disk.You cannot type on the
printing surface before
Printing the dateprinting. If you want to
You can print the datewrite greetings or draw
when the image wason the printing surface
saved by setting DATE toafter printing, use an oil
ON. ink pen.
32GBMaking Various PrintsMaking Various Prints33GB
Confidential
1-7DMP-1000P (AEP) |
ACEC
