Menu items in the 300s, relating to editing operations (Continued)
Item number Item nameSettings
309SERVO/AV REFERENCESelect the servo reference signal.
SELAUTO1 : During recording, an analog component/composite or digital input video
signal is used as the servo reference signal. During playback, the signal
selected by the OUT REF switch on the subsidiary control panel is used as the
servo reference signal. If the signal selected by the OUT REF switch on the
subsidiary control panel is not connected, an internal reference signal is used.
AUTO2: When the OUT REF switch is set to REF, and any of the ASSEMBLE,
VIDEO, and AUDIO CH1 to CH4 buttons is lit, the reference signal for video/
audio signal processing is locked to the input video signal.
EXT: The servo reference signal is forced to be OEXT� (an external reference
video input signal is used).
310REC INHIBITSelect the conditions under which recording is inhibited when the REC INHIBIT
switch on the subsidiary control panel is set to ON.
ALL : All tape recording is inhibited.
CRASH: Normal tape recording is inhibited. Select this setting when you wish to
carry out assemble editing.
VIDEO : Inhibit recording of video and CTL signals.
AUDIO : Inhibit recording of audio and CTL signals.
Note
When the REC INHIBIT switch is set to ON, the REC INHIBIT indicator on the
lower control panel lights. If an operation inhibited by this item is attempted, the
REC INHIBIT indicator flashes.
311ANALOG AUDIO EDITItems 311 to 314: Selecting the method of edit preset setting for the digital audio
PRESET REPLACE FORchannels on this unit by means of the analog audio preset control function of an
CH1editor or remote controller when carrying out digital audio editing using a remote
controller or an editor (such as the BVE-600) which does not have a function for
312ANALOG AUDIO EDIT
controlling digital audio edit preset.
PRESET REPLACE FOR
Set edit preset of each digital audio channel (channels 1 to 4) of this unit on or off
CH2
according to the analog audio preset specified by the remote controller or editor.
313ANALOG AUDIO EDIT
NO DEFINITION
PRESET REPLACE FORANALOG CH1: Follow edit preset of analog channel 1.
CH3ANALOG CH2: Follow edit preset of analog channel 2.
Chapter 7
314ANALOG AUDIO EDITANALOG CH1+CH2: Follow edit preset of analog channel 1 or 2.
PRESET REPLACE FORThe default settings for each item are as follows:
CH4311 : ANALOG CH1
Menu System
312 : ANALOG CH2
313 : NO DEFINITION
314 : NO DEFINITION
317AUDIO EDIT MODESelect the type of audio transition used for digital audio editing.
CUT EDIT: Cut editing (audio discontinuity at transition point, and possible noise
during playback).
CROSS FADE : Cross-fadeIN/OUT
t
FADE IN/OUT: Fade in and outIN/OUT
t
t: Time set by item 803 DIGITAL AUDIO FADE TIME.
(Continued)
Chapter 7 Menu System7-13 |
ACEC
