C:\Documents and Settings\PC3\Desktop\My master page=right
C:\Documents and Settings\PC3\Desktop\My
C:\Documents and Settings\PC3\Desktop\My
Checking the audio signal
TV Virtual Surround
format
Settings (TVS)
If you press AUDIO repeatedly during
playback, the format of the current audio
When you connect a stereo TV or 2 front
signal (Dolby Digital, DTS, PCM, etc.)
speakers, TVS (TV Virtual Surround) lets
appears as shown below.
you enjoy surround sound effects by using
sound imaging to create virtual rear speakers
Example:
from the sound of the front speakers (L: left,
Dolby Digital 5.1 ch
R: right) without using actual rear speakers.
Rear (L/R)TVS was developed by Sony to produce
surround sound for home use using just a
stereo TV.
1:ENGLISH DOLBY DIGITAL3 / 2 .1If the player is set up to output the signal from
the DIGITAL OUT (COAXIAL or
Front (L/R) LFE (Low Frequency OPTICAL) jack, the surround effect will only
+ CenterEffect)Sound Adjustmentsheard when ?DOLBY DIGITAL? is set to
?D-PCM? in ?AUDIO SETUP? (page 69).
Example:
Dolby Digital 3 ch
2:SPANISH DOLBY DIGITAL2 / 1
Front (L/R)Rear
(Monoral)
About audio signals
Audio signals recorded in a disc contain the
sound elements (channels) shown below.
Each channel is output from a separate
speaker.
Front (L)
Front (R)
1Press SUR during playback.
Center
Rear (L)The following display appears.
Rear (R)
Rear (Monaural): This signal can be either
TVS DYNAMIC
the Dolby Surround Sound processed
signals or the Dolby Digital sound?s
monaural rear audio signals.
LFE (Low Frequency Effect) signal
2Press SUR repeatedly to select
Note
one of the TVS sounds.
If ?DTS? is set to ?OFF? in ?AUDIO SETUP?
(page 68) the DTS track selection option will not Refer to the following explanations given
appear on the screen even if the disc contains DTS for each item.
tracks. TVS DYNAMIC
TVS WIDE
TVS NIGHT
TVS STANDARD
,continued
47
DVP-NC675P
3-091-202-12(1) |
ACEC
