Getting started
Unlocking the transport lockSetting up the camera
Be sure to unlock the transport lock before you usePlace the camera on a leveled surface.
the camera.
1Detach the protection plate by turning the screw
with a coin, etc.
To fix the camera firmly
Protection plate
1 Align the bosses on the protection plate with the
holes on the bottom of the camera, then turn the
2Turn the TRANSPORT to RELEASE until it
screw clockwise with a coin etc.
clicks with a coin, etc.
TRANSPORT
LOCK
Bosses
Place the plate with
RELEASEits end projected out
of the rear of the
camera.
Notes
Y Be sure to detach the protection plate or use the plate to fix the
camera. (See OTo fix the camera firmly� below.)
Y When you use the camera, be sure to set the transport lock to
RELEASE until it clicks with a coin, etc. When you carry the
camera, be sure to turn the TRANSPORT to LOCK with a coin,
etc. The horizontal movement of the camera is locked.
2 Stick the supplied velcro tapes on the protection
plate and the surface on which the camera is to be
placed, then fix the camera.
w
q
q
Note
Keep the camera away from strong light sources such as direct
sunlight or artificial lights. Otherwise, the remote control may not
function properly.
2 |
ACEC
