SECTION 3
TEST MODE
[MC Cold Reset][Change-over of AM Tuner Step between 9kHz and 10kHz]
? The cold reset clears all data including preset data stored in the? A step of AM channels can be changed over between 9kHz and
RAM to initial conditions. Execute this mode when retur10kHz.ning the
set to the customer.Procedure:
Procedure:1. Press POWER button to turn the set ON.
1. Press three buttons GROOVE , ENTER/NEXT , and 2. Select the function OTUNER�, and press TUNER/BAND
DISC 1 simultaneously.button to select the BAND OAM�.
2. The fluorescent indicator tube becomes blank instantaneously3. Press POWER b,utton to turn the set OFF.
and the set is reset.4. Press ENTER/NEXT and POWER buttons simultaneously,
and the display of fluorescent indicator tube changes to OAM
[CD Delivery Mode]9k STEP� or OAM 10k STEP�, and thus the channel step is
? This mode moves the pickup to the position durable to vibrchanged oavtion.er.
Use this mode when returning the set to the customer after repair.
Procedure:[LED and Fluorescent Indicator Tube All Lit, Key Check
1. Press POWER button to turn the set ON.Mode]
2. Press PLAY MODE button and POWER button simulta-Procedure:
neously.1. Press three buttons GROOVE , ENTER/NEXT , and DISC 3
3. A message OLOCK� is displayed on the fluorescent indicatorsimultaneously.
tube, and the CD delivery mode is set.2. LEDs and fluorescent indicator tube are all turned on.
Press DISC 2 button, and the key check mode is activated.
[MC Hot Reset]3. In the key check mode, the fluorescent indicator tube displays
? This mode resets the set with the preset data kept stored in theOK 1 V0 J0�. Each time a button is pressed, OK�value increases.
memory. The hot reset mode functions same as if the poHowevweer corr, once a bdutton is pressed, it is no longer taken into
is plugged in and out.account.
Procedure:OJ� Value increases like 1, 2, 3 ... if rotating JOG knob in O+�
1. Press three buttons GROOVE , ENTER/NEXT , anddirection, or it decreases like 0, 9, 8 ... if rotating in O�� direc-
DISC 2 simultaneously.tion.
2. The fluorescent indicator tube becomes blank instantaneouslyOV� Value increases lik,e 1, 2, 3 ... if rotating VOLUME knob
and the set is reset.in O+� direction, or it decreases like 0, 9, 8 ... if rotating in O��
direction.
[Sled Servo Mode]4. To exit from this mode, press three buttons in the same manner
? This mode can run the CD sled motor freely. Use this modeas step 1,, for or disconnect the power cord.
instance, when cleaning the pickup.
Procedure:
1. Select the function OCD�.
2. Press three buttons GROOVE , ENTER/NEXT , and
FLASH simultaneously.
3. The Sled Servo mode is selected, if OCD� is blanking on the
fluorescent indicator tube.
4. With the CD in stop status,) button in CD section to press
move the pickup to outside tr0 bacutton to inside track, ork.
5. To exit from this mode, perform as follows:
1) Move the pickup to the most inside track.
2) Press three buttons in the same manner as step 2.
Note:
? Always move the pickup to most inside track when exiting from
this mode. Otherwise, a disc will not be unloaded.
? Do not run the sled motor excessively, otherwise the gear can be
chipped.
[Change-over of FUNCTION Name]
? The FUNCTION name of external input terminal can be changed
over to VIDEO or MD. With the FUNCTION selected to OMD�,
about 5dB mute is applied to the input gain.
Procedure:
1. Press POWER button to turn the set OFF.
2. Press POWER button together with FUNCTION button, and
the power is turned on, the display of fluorescent indicator tube
changes to OMD� or OVIDEO� instantaneously, and thus the
FUNCTION is changed over.
� 30 � |
ACEC
