Preset TuningManual Memory Presetting
This facility is used to store FM, AM broadcasting from
Channel 1 to 30 respectively.
POWER ON6 1 5 4,6 3 2
Automatic Memory Presetting
POWER ON1432
ENGLISH1. Press the TUNER button.
2. Select the AM or FM by pressing the BAND selector
button.
1. Press the TUNER button.3. Press the MODE button to change to TUNING mode.
(The PRESET CH. indicator disappears from the
2. Select the AM or FM by pressing the BAND selectordisplay).
button.4. Select the frequency you want to preset by pressing
UP or DOWN tuning button.
3. Press the MEMORY button for a while (for more than
5. Press the MEMORY button briefly, MEMORY display
1.5 seconds).will blink at an interval of 1 second.
1 The start frequency will show in the display.
I87.5 MHz in FM, 522 kHz in AM.6. While the MEMORY indicator is lit, press the numeric
2 The frequency and display will automatically scan.key(s) to input the channel number in which the data
I50 kHz steps for FM, 9 kHz steps for AM.(AM or FM band and frequency) for the broadcast is
3 The frequency shown in the display will rapidlyto be stored (or press the PRESET button then press
change. As each station is located a presetthe MEMORY button again).
number will appear in the display indicating which
preset MEMORY button has been assigned to the
station located. The scanning process will contin- Recalling Frequencies
ue to operate in this fashion until 30 stations havePress the numeric key(s) corresponding to the channel
been found and entered into the preset memorynumber to tune directly to a broadcast.
or when there are no more stations to be found
on the waveband chosen. The memory indicator Using the Memory Scan function
will extinguish and let you hear the last station toWhen the MEMORY SCAN button is pressed, the preset
be memorized.
I To listen to the memorized station select the bandchannels in which frequencies in the band (AM or FM)
required and press the numeric keys button 1, 2, 3selected have been stored are scanned at 5-second
etc.intervals. When you hear a broadcast you want to listen
to, release the Memory Scan function by pressing the
4. The last memorized channel of each band will beMEMORY SCAN button again.
displayed when Auto Memory is completed. Check
the programmed frequencies with PRESET UP, "Back-up" memory function
DOWN button.This function conserves the already preset station mem-
ories, and "Most-recent" memory function, even in the
event of a cut-off of power supply, as when the plug is
pulled out of the wall outlet, for 3 days.
� 11 � |
ACEC
