Automatic Degaussing to Remove Colour Patches
ENG
A degaussing coil is mounted around the picture tube, so you do not normally need to degauss the
television manually.
If you move the television to a different position and color patches appear on the screen, you must:
Switch the television off by pressing the O� (ON/OFF) button on the front panel
Unplug the television from the wall socket
Leave the television power-off (stand-by) for about 30 minutes so that the automatic degauss
function can be activated, and then press the POWERbutton on the remote control.
If your television will be left unattended, press the O� (ON/OFF) button to turn your
television off.
Troubleshooting: Before Contacting Service Personnel
Before contacting Samsung after-sales service, perform the following simple checks.
If you cannot solve the problem using the instructions below, note the model and serial number of the
television and contact your local dealer.
No sound or picture Check that the mains lead has been connected to a wall socket.
Check that you have pressed the O� (ON/OFF) button.
Check the picture contrast and brightness settings.
Check the volume.
Normal picture but no sound Check the volume.
Check whether the MUTEbutton has been pressed on the
remote control.
No picture or black and white picture Adjust the colour settings.
Check that the broadcast system selected is correct.
Sound and picture interference Try to identify the electrical appliance that is affecting the television
and move it further away.
Plug your television into a different mains socket.
Blurred or snowy picture, Check the direction, location and connections of your aerial.
distorted soundThis interference is often due to the use of an indoor aerial.
Remote control malfunctions Replace the remote control batteries.
Clean the upper edge of the remote control (transmission window).
Check the battery terminals.
35 |
ACEC
