Connecting external equipment
English
Before connecting any external equipment, turn off all main power switches. If there is no switch
remove the mains plug from the wall socket.
the back of your television
SCART 2 (EXT2)
SCART 1 (EXT1)
*a decoder could
be Digital Satellite,decoder*
Free to Air or any
other compatibleTVVCRIN
decoder.
OUT
video recorder
IN
OUT
IN/OUTSAT
WE RECOMMEND THAT YOU USE SCART LEADS INA wide variety of external equipment can be
ADDITION TO AERIAL CABLES WHEREVERconnected to the back of the television, therefore
POSSIBLEthe relevant owners manuals for alladditional
equipment mustbe referred to.
Aerial cables:
We recommend SCART1for a decoder, SCART2for a
Connect the aerial to the socket on the rear of the
VCR and Input 3for additional equipment.
television. If you use a decoder* and/or a video
recorder it is essential that the aerial cable is connected
If connecting S-VIDEO equipment, set the INPUT for
through the decoder and/or through the video
EXT2. See page 16.
recorder to the television.
If the television automatically switches over to monitor
SCART leads:
external equipment, return to normal television by
Connect the video recorder IN/OUT socket to thepressing the desired programme position button.
television. Connect the decoder TV socket to the
television. Connect the video recorder SAT socket toTo recall external equipment, press Bto select
the decoder VCR socket.between EXT1, EXT2 and EXT3.
Before running Auto tuning put your decoder and
video recorder to Standby.
66 |
ACEC
