Remember�
FOR YOUR GUIDANCE
For television
operation
queries, please
ring the
Questions and Answers�
helpline�
?
If you experience what seem like problems operating your TV, we
recommend you read through the simple checks below and on pages 39 and 40before calling the helpline.
Why is there no sound or picture?There IS a picture, but why is there little or no colour?
QQ
Check that the mains switch is on and check all theWhen using an external source, for instance, a poor
Aconnections. Press the Standby buttoni on theAquality video tape, if there is little or no colour,
remote control to make sure that the TV is not in Standbyimprovements may sometimes be achieved. The
mode. Press a number button on the remote control totelevision is factory set to AUTO in the Set up menu to
cancel any Timer off setting.automatically display the best colour system.
To check that you have the best colour�
Why am I not receiving a clear digital picture?
Q
From the Set up menu select Colour.
1
Check the signal level.
A
Press the DTV MENU button then with the Q or P
button highlight Setupand press SELECT. Then highlight
Manual Tuneand press SELECT.Set up
ColourAUTO
As long as the signal level bar is green the signal is good.Auto tuning
If the bar is yellow/red the signal is poor and you shouldManual tuning
contact your aerial technician.Programme sorting
Teletext
Why does the picture and sound breakup ?mosaic?
Qor the image freeze?EXIT : To exit
Check the signal level in Manual Tune.
With the Sor Rbutton, choose between AUTO,
2
ACheck the aerial. You may have to contact your
PAL, SECAM, NTSC 4. 43 or 3. 58.
aerial technician to re-position the aerial.
Check the connections and cables. The cables may be
defective and require replacement.QWhy has the screen turned blue?
Blue screenin the Feature menu is ON. When
Why can?t I see the DTV MAIN MENU
QAno signal is being received, the TV will turn off the
sound and switch the TV screen to blue. After 20 minutes
You are in analogue mode. Press the ATV/DTV
the TV will switch to Standby mode.
Abutton.
Why is the video recorder/DVD picture in black and white?
Q
Why can?t the digital text service be seen?
Q
Check that the correct inputhas been chosen. See
The digital programme you are on is not broadcasting
AAVconnections.
Adigital text. Try another digital programme.
Why can?t I see the video tape/DVD I am playing?
Q
Why does the LOCKED CHANNEL display come up?
Q
Make sure you have connected the VCR/DVD player
You have chosen to Lock the programme. See theAusing a Scart lead and seepage37for
AParental controlpages.connections.
Why is the video picture good but there is no sound?Can anything else cause a poor picture?
QQ
Check the Scart lead connection.Yes. You must ensure that the aerial leadis
AAconnected directly to the TVand not the VCR.
38 |
ACEC
