�For quick
FOR YOUR GUIDANCE
reference to topics,
see the INDEX at the
back of this manual.
Questions and Answers�
If you experience what seem like problems operating your TV, we recommend you read through these
simple checks before calling the helpline.
Why is the screen fuzzy, and the colours not clear?Why is there no sound or picture?
QQ
On this television the red, green and blue imagesCheck that the mains switch is on and check all the
Aare projected separately onto the screen. TheyAconnections. Press the Standby button i on the
converge to form a full colour picture and when theyremote control to make sure that the TV is not in Standby
converge correctly you will see a clear screen. It ismode.
especially apparent when viewing cartoons.
The colour convergence is factory set and should need
There IS a picture, but why is there little or no colour?
little or no adjustment. However, convergence may driftQ
over time or if you move the TV.
There is little or no colour�
To realign the colour�
AWhen using an external source, for instance, a
poor quality video tape, if there is little or no colour,
From the FEATURE menu select Convergence.
1improvements may sometimes be achieved. The
television is factory set to AUTOin the SET UP menu to
automatically display the best colour system.
To check that you have the best colour�
Press the
Q
access the second part button toFrom the SETUP menu select Colour.
1
of the FEATURE MENU
FEATURE MENU
SET UP
Convergence
ColourAUTO
SystemI
To adjust the colours, pressAuto tune
2
the RED or BLUE button to
Manual tune
select RED or BLUE and thenP
Programme swap
the S or R and P or Q
Manual fine tuning
buttons to adjust until the
Programme skipOFF
white cross has no 'shadow'.
P
EXIT : To exit
With the S or R button, choose between AUTO,
2
PAL, SECAM,NTSC 4. 43or 3. 58.
123
ff
f f
46Why are there distorted images/faded colours?Q
red blue : to eEXITxit
This is sometimes due to condensation if the
789Aroom temperature rises rapidly or if the TV is
moved from a cold room to a warm room. If you leave
the set turned on for a while this should improve
Press the EXIT button to go back to the TV screen
3images.
to check the picture. If more adjustment is
needed, simply repeat steps 1 and 2 above.
If the edges of the screen are not right, select the
numbers in turn e.g.number 1 to select the topWhy canOt I see the video tape I am playing?
Q
left hand corner of the screen, and repeat step 2.
Press EXIT to finish.Make sure you have connected the VTR to the TV
4
Ausing a Scart lead.
2222 |
ACEC
