Connecting external equipment
Before connecting any external equipment, turn off all main power switches.
the back of your TV
SCART 3
(EXT 3)
COMPONENT VIDEO INPUT
SCART 1
(EXT 4)
(EXT 1)
SCART 2
(EXT 2)
*a decoder could
be Digital Satellite or
any other compatible
decoder*
decoder.
TVVCRIN
OUT
video recorder
IN
OUT
IN/OUTSAT
WE RECOMMEND THAT YOU USE SCART LEADS INA wide variety of external equipment can be
ADDITION TO AERIAL CABLES WHEREVER POSSIBLEconnected to the back of the TV, therefore the
relevant owners manuals for alladditional
Aerial cables:equipment mustbe referred to.
Connect the aerial to the socket on the rear of theWe recommend Scart 1for a decoder, Scart 2for a
television. If you use a decoder* and/or a videoVCR and Scart 3for additional equipment (games
recorder it is essential that the aerial cable is connectedconsole etc.).
through the decoder and/or through the video
recorder to the television. If connecting S-VIDEO equipment, set the INPUT for
EXT2 or EXT3. See page 15.
Scart leads:
If the TV automatically switches over to monitor
Connect the video recorder IN/OUT socket to the TV.external equipment, return to normal TV by pressing
Connect the decoder TV socket to the TV. Connect thethe desired programme position button.
video recorder SAT socket to the decoder VCR socket.
To recall external equipment, press Bto select
Before running Auto tuning put your decoder andbetween EXT1, EXT2, EXT3 or EXT4.
video recorder to Standby.
The phono sockets alongside the COMPONENT VIDEO
INPUT sockets will accept L and R audio signals.
6 |
ACEC
