Connecting external equipment
Before connecting any external equipment, turn off all main power switches.
SCART 3
the back of your TV
(EXT 3)
SCART 1
(EXT 1)
SCART 2
(EXT 2)
*a decoder could
be Digital Satellite ordecoder*
any other compatible
decoder.IN
TVVCR
OUT
video recorder
IN
OUT
IN/OUTSAT
WE RECOMMEND THAT YOU USE SCART LEADS INA wide variety of external equipment can be
ADDITION TO AERIAL CABLES WHEREVERconnected to the back of the TV, therefore the
POSSIBLErelevant owners manuals for alladditional
equipment mustbe referred to.
Aerial cables:
We recommend Scart 1for a decoder, Scart 2for a
Connect the aerial to the socket on the rear of the
VCR and Scart 3for additional equipment.
television. If you use a decoder* and/or a video
recorder it is essential that the aerial cable is connected
If connecting S-VIDEO equipment, set the INPUT for
through the decoder and/or through the video
EXT2or EXT3 accordingly. See page 14.
recorder to the television.
If the TV automatically switches over to monitor
Scart leads:
external equipment, return to normal TV by pressing
Connect the video recorder IN/OUT socket to the TV.the desired programme position button.
Connect the decoder TV socket to the TV. Connect the
video recorder SAT socket to the decoder VCR socket.To recall external equipment, press Bto select
between EXT1, EXT2, EXT3.
Before running Auto tuningput your decoder and
video recorder to Standby.
6 |
ACEC
