Starting a washing programme
The countdown will decrease with step of 3 hours.
1. Check that the baskets have been
loaded correctly and that the spray During the countdown,the indicator light of the selected
programme and the indicator light of the number of hours
arms can rotate freelyto the start of the programme will remain illuminated.
Once the delay start has elapsed the programme will start
automatically,the indicator lights for delay start turn off and
2. Turn on the water tapthe indicator light of the phase underway illuminates.
Cancelling the "delay start"
3. Close the dishwasher door
It is possible to cancel a countdown in progress or before it
starts, simply pressing the delay start push button until the
4. Press the On/Off push buttonindicator lights corresponding to the delay start hours are
off.
The On/Off indicator light will come on.In this case the selected washing programme will start
automatically after 6 seconds.
5. Setting and starting the programme
Press the push button corresponding to the required 8. End of the washing programme
programme (see "Washing programmes"chart).The dishwasher will automatically stop and the end of
The indicator light corresponding to the programme programme phase indicator light will illuminate.
illuminates and the phase indicator lights foreseen for that
programme start flashing.The indicator light of the programme just ended will remain
on.
It is possible to change the programme selection simply The dishwasher has finished the programme only when
pressing the push button of another programme within 6 the end of programme indicator light is illuminated.
seconds.
Once the programme has started the phase indicator lights If you do not wait for the end of the programme it will not
will turn off except for the phase under way.be possible to start a new programme until the previous
programme has been cancelled.
(For instructions on how to cancel a programme see the
corresponding instructions).
6. Interrupting/cancelling a washing
programmeIf during the drying phase (drying indicator light
illuminated) the dishwasher door is opened or the On/Off
Change or interrupt a washing programme in progress push button is pressed,the running programme is
ONLY if itOs absolutely necessary.automatically cancelled and the machine returns to setting
Attention!Hot steam may escape when the door is mode (in this case it is possible to select a new
opened. Open the door carefully.programme without cancelling the previous)
To interrupt a washing programmeSwitch off the dishwasher by pressing the On/Off push
button,the On/Off indicator light turns off.
a)Open the dishwasher door;the programme will stop.Open the door and wait a few minutes before removing the
Close the door;the programme will start from the point dishes;in this way they will be cooler and the drying will be
in which it was interrupted.
improved.
b)Press the On/Off push button (in this case all the Water may appear on the sides and door of the
indicator lights turn off).Press the On/Off push button dishwasher as the stainless steel will eventually become
again;the programme will start from the point in which it cooler than the dishes.
was interrupted.
To cancel a washing programmeUnloading the dishwasher
A programme in progress can be cancelled at any time.Hot dishes are sensitive to knocks.The dishes should
Press for about 3 seconds the push button of the running therefore be allowed to cool down before removing from
programme until all indicator lights are off.the appliance.
Only the On/Off indicator light will remain illuminated.Empty the lower basket first and then the upper one; this
It is now possible to select a new washing programme.will avoid water dripping from the upper basket onto the
dishes in the lower one.
When the washing programme has finished, it is
7. Setting/cancelling the "Delay start"recommended that the dishwasher is unplugged and the
The setting of the delay start occurs before selecting water tap turned off.
the programme.
Setting the "Delay start"
Press the "delay start"push button until the indicator light
corresponding to the chosen hours flashes (3,6 or 9
hours).
Press the push button corresponding to the required
washing programme;the indicator light corresponding to
the programme illuminates and the phase indicator lights
for that programme start flashing.
From the moment that the washing programme has been
set, the delay start will begin with the countdown.
14 |
ACEC
