6. Remove the door stop. Move it to the opposite side of the
refrigerator door as shown in Graphic 5. Final Steps (all models)
7. Position the refrigerator handle on opposite side of the
1. Check all the holes to make sure that hole plugs and screws
refrigerator door as shown in Graphic 6-3. Drive the two top are in place. Reinstall the top hinge cover as shown in the Top
screws in the handle first. Align the lower portion of the Hinge graphic.
handle and drive the bottom screw.
8. Align refrigerator bottom trim. For Style 1, replace the door 2. Replace the base grille. See Base Grille graphic.
handle screw cover. See Graphic 6-1. For Style 2, slide trim
into place. See Graphic 6-2.
WARNING
9. Tighten all screws. Set aside refrigerator door until bottom
hinge is installed on product.
Reverse Doors-Contour Door (optional)
Cabinet
1. Remove the uD??" hex-head hinge screws from handle side and Electrical Shock Hazard
move them to the opposite side. See Graphic 1-1.
2. Remove the cabinet hinge hole plugs from the cabinet top Plug into a grounded (earthed) outlet.
and move them to the opposite side hinge holes as shown in
Graphic 1-2.Do not remove ground prong.
Do not use an adapter.
Doors
1. Remove the door hinge hole plugs from the top of the freezer Do not use an extension cord.
and refrigerator doors. Move them to the opposite side as
shown in Graphic 3.Failure to follow these instructions can result in death,
fire, or electrical shock.
2. Remove the door stops from both the freezer and the
refrigerator doors and move them to the opposite side. See
Graphic 5.3. Plug in refrigerator or reconnect power.
4. Reset the controls. See ?Using the Control(s).?
Replace Doors and Hinges (all models)5. Return all removable door parts to doors and food to
NOTE: Graphic may be reversed if door swing is reversed.refrigerator.
1. Replace the parts for the bottom hinge as shown and tighten
screws. See Bottom Hinge graphic. Replace the refrigerator
door.
NOTE: Provide additional support for the doors while the
hinges are being moved. Do not depend on the door magnets
to hold the doors in place while you are working.
2. Assemble the parts for the center hinge as shown and tighten
all screws. See Center Hinge graphic. Replace the freezer
door.
3. Assemble the parts of the top hinge as shown in the Top
Hinge graphic. Do not tighten the screws completely.
4. Line up the doors so that the bottom of the freezer door
aligns evenly with the top of the refrigerator door. Tighten all
screws.
8 |
ACEC
