OPERATING INSTRUCTIONS
The vent control
The vent draws stale or smoky air from the room,
or circulates existing room air.
To exhaust room air
1.Pull the vent control open.
2.Set the fan control to the desired setting.
If no cooling is desired, set the fan control
to HIGH FAN or LOW FAN (control panel A)
or FAN (control panel B).
3.Set the thermostat control to the desired
setting.
To circulate room air
1.Push the vent control closed.
2.Set the fan control to the desired setting.
If no cooling is desired, set the fan control
to HIGH FAN or LOW FAN (control panel A)
or FAN (control panel B).
3.Set the thermostat control to the desired
setting.
NOTE: For maximum performance, the vent
control must be in the closed position when
cooling or room air circulation is desired.
Changing air direction
side to sideThe louvers in the top of the front panel allow you
controlside to sideto control the direction of the cooled air. Use the
up or down
directional tabup or downtabs to direct the air up, down, right, left, orcontrol
directional tab
straight ahead.
11 |
ACEC
