Complete Installation
NOTE: Handle the air conditioner gently. 4. Reinstall the two screws that attach the cabinet to the base.
1. Make sure the free end of the ground wire is outside of the 5. Push the front panel straight on and then lower it slightly to
cabinet.lock it into place.
6. Reinstall the two screws to attach the front panel to the air
conditioner cabinet.
WARNING
Excessive Weight Hazard
Use two or more people to move and install
air conditioner.
Failure to do so can result in back or other injury.
2. Insert the air conditioner into cabinet.
NOTE: Make sure the free end of the ground wire is outside
of the cabinet.
NOTE: For through-the-wall installations, if needed, install the
molding around the room side of cabinet.
AWARNING
A.Ground wire outside of the cabinet
Electrical Shock Hazard
WARNINGPlug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
Electrical Shock Hazard
Connect green ground wire to ground screw.
7. Plug into a grounded 3 prong outlet.
Failure to do so can result in death or electrical shock.
8. Press RESET on the power supply cord. See ?Electrical
Requirements.?
3. Connect the green ground wire to the ground screw.
Position the ground wire pointing straight up. Put the excess
ground wire between the coil and the air conditioner cabinet.
A
B
A.Green ground wire
B.Ground screw
12 |
ACEC
