Clock and Timer
Clock and Timer Control (select models)
NOTE: The display will flash when electrical power is first supplied to the appliance or if there has been a power failure.
Clock
Timer
Select Models: This clock was preset at the factory for 50 Hz. The frequency may be changed to 60 Hz by sliding the switch on
the back of the clock to the corresponding 60 Hz position. If this adjustment is necessary, please consult your dealer or other
qualified installer.
To Set the Clock:To Set the Timer:YIf the Clock pad is pressed, the
colon will continue to flash to indi-
1. Press the Clock pad.The timer can be set from one minute (0:01)
YA beep will sound when the Clockup to 12 hours (12:00). The timer doescate the timer is in use.
pad is pressed.NOT control the oven.3. A beep will sound at one minute (0:01).
1. Press the Timer pad.4. At the end of the timer operation, 0:00
2. Press or press and hold the or pad
until the correct time of day appears inYA beep will sound when the Timerwill appear in the display and three
the display.pad is pressed.beeps will sound.
YOne beep will sound every 10
YPress to change the time in oneY0:00 will appear in the display.seconds for 10 minutes or until the
minute increments.2. Press or press and hold the or padtimer operation is cancelled.
YPress and hold to change the timeuntil the correct time appears in the dis-
in10 minute increments.play.
To recall the time of day when the timer isYPress to change the time in oneTo Cancel the Timer:
displayed, press the Clock pad.minute increments.Press the Timer pad and the current time
YPress and hold to change the timeof day will reappear in the display.
in 10 minute increments.NOTE: When 0:00 is displayed, pressing
YTimer will start automatically after aeither the Timer or Clock pad will also
few seconds. The flashing colon indi-cancel the timer operation.
cates that the timer is in use.
6 |
ACEC
