Troubleshooting
PROBLEMPOSSIBLE CAUSESWHAT TO DO
Ice maker is not Y Ice maker switch is not ONY Confirm ice maker switch is ON. See Automatic Ice
producing iceMaker,pages 12-13.
Y Household water supply is notY See Connecting the Water Supply,pages 8-9.
reaching water valve.
Y Copper tubing has kinks.Y Turn off water supply and remove kinks. If kinks
cannot be removed, replace tubing.
Y Water pressure is too low.Y Water pressure must be between 35 to 100 pounds
per square inch to function properly. A minimum
pressure of 35 pounds per square inch is
recommended for refigerators with water filters.
Y Check freezer temperature.Y See Temperature Controls, pages 10 and 11. Freezer
temperature should be between 0! to 2! F (-18! to
-17! C) to produce ice.
Y Inner fountain door is blocked orY Do not attempt to free the fountain door by
frozen.continuously pressing the dispenser button. Contact
qualified service technician.
Temp Alarm LightY Exceeded normal operatingY See Temp Alarm,page 11.
is flashingtemperatures.
All lights on Y Control has been set to SabbathY See, Sabbath Mode,page 11.
dispenser andMode.
interior lights are
off and appliance
is still running
Door alarm set, noY Alarm mode has been disabled.Y To activate audible alarms, refer to page 11.
alarm sounded
Temperatures inY Temperature display has been set toY See Temperaturedisplay on page 10.
display look too lowCelsius rather than Fahrenheit.
30 |