30105536aGB.fm Page 23 Thursday, December 30, 2004 10:53 AM
REMOVING THE FILTER
We recommend that you check and clean the filter
regularly, at least two or three times a year.
Especially:
? If the appliance is not draining properly or if it fails to
perform spin cycles.
? If the pump is blocked by a foreign body (e.g. buttons,
coins or safety pins)
IMPORTANT: make sure the water has cooled
before draining the appliance.
1. Stop the appliance and unplug it.
2. Open the filter cover. Open the filter cover with the
aid of the coloured insert from the detergent
container.
3. Place a container beneath it.
4. Open the filter but do not remove it completely.
Slowly turn the filter anticlockwise until the water
begins to drain out.
5. Wait until all the water has drained.
6. Now unscrew the filter completely and remove it.
7. Clean the filter and the filter chamber.
8. Check that the pump rotor moves freely.
9. Re-insert the filter and screw it in clockwise as far as it
will go (handle must be horizontal).
10. Pour about 1 litre of water into the detergent drawer
to reactivate the ?Eco system?. Check that the foreign
body trap is inserted properly and securely.
11. Close the cover and lock it.
12. Plug in the appliance once again.
13. Select a programme and start it.
DRAINING RESIDUAL WATER
Before emptying the residual water, switch the appliance off and unplug it from the mains
socket.
Open the cover of the foreign body trap. Open the filter cover with the aid of the coloured
insert from the detergent container. Place a container beneath it.
1. Open the filter but do not remove it completely. Slowly turn the filter anticlockwise until the water
begins to drain out.
2. Wait until all the water has drained.
3. Now unscrew the filter completely and remove it.
4. Tilt the appliance forwards carefully to allow the water to flow out.
5. Re-insert the filter and screw it in clockwise as far as it will go (handle must be horizontal).
6. Close the cover and lock it.
Before using the washing machine again:
1. Pour approx. 0.5 litre of water into the detergent drawer to reactivate the ?Eco system?.
2. Plug in the appliance once again.
23
Black process 45.0° 100.0 LPI |
ACEC
