It is the customer's responsibility:
Recommended ground method
To contact a qualified electrical installer.
For your personal safety, this air conditioner must be grounded. To assure that the electrical installation is adequate and in
This air conditioner is equipped with a power supply cord having conformance with National Electrical Code, ANSI/NFPA 70 -
a grounded 3 prong plug. To minimize possible shock hazard, the latest edition, and all local codes and ordinances.
cord must be plugged into a mating, grounded 3 prong outlet,
Copies of the standards listed may be obtained from:
grounded in accordance with all local codes and ordinances. If a
National Fire Protection Association
mating outlet is not available, it is the customer's responsibility to
One Batterymarch Park
have a properly grounded 3 prong outlet installed by a qualified
Quincy, Massachusetts 02269
electrical installer.
INSTALLATION INSTRUCTIONS
3. Using #10 x 3D?" pan-head screws, attach top channel to air
conditioner.
Unpack the Air Conditioner
B
BAC
WARNING
Excessive Weight Hazard
Use two or more people to move and install
air conditioner.
Failure to do so can result in back or other injury.
Remove packaging materials
Remove and properly dispose of packaging materials.
Remove tape and glue residue from surfaces before turning
A.Top channel
on the air conditioner. Rub a small amount of liquid dish soap
B.#10 x 3D?" pan-head screw (on all models)
over the adhesive with your fingers. Wipe with warm water
C.#10 x 3D?" pan-head screw (on some models)
and dry.
Do not use sharp instruments, rubbing alcohol, flammable
fluids, or abrasive cleaners to remove tape or glue. These Models with side curtains (on some models)
products can damage the surface of your air conditioner.
NOTE: Attach side curtains to air conditioner before placing air
conditioner in window.
Prepare Air Conditioner for Installation
1. Locate supplied bag of 6 - #8 x 3D?" pan-head screws.
Handle air conditioner with care.
2. Insert top and then bottom of right-hand curtain housing in
Be sure your air conditioner does not fall out of the opening top and bottom curtain guides on air conditioner.
during installation or removal.Back View
Where the power cord exits the air conditioner should be
placed no more than 4 ft (122 cm) from a grounded 3 prong
AB
outlet.
1. Locate supplied bag of screws.
2. Place top channel on top of air conditioner, lining up the holes
in top channel with the holes on top of air conditioner. Some
models have 2 holes, and some have 3.
A.Curtain housing
B.Curtain guides
5 |
ACEC
