2. If the feet on the bottom of the air conditioner do not rest on and adjust angle of tray until air conditioner sits against the
the wood strip, remove the air conditioner and adjust the bottom of the tray.
?
SMART-MOUNT tray until feet rest on the wood strip.
IMPORTANT: The tray must slope downward slightly toward
the outside to provide proper drainage for the air conditioner.
A
BA
B
C
A.Air conditioner
?
B.Feet on bottom of air conditionerA.Air conditioner sitting on SMART-MOUNT tray
?
C.3D?" (1.9 cm) x 2" (5 cm) wood stripB.SMART-MOUNT tray
3. If top channel does not rest against the top of the wall 5. Install screws through the top channel to secure the air
?conditioner into the wall opening.
opening, remove air conditioner and adjust SMART-MOUNT
tray until top channel rests against wall.
Complete Installation
IMPORTANT: The tray must slope downward slightly toward
the outside to provide proper drainage for the air conditioner.
1. Trim and seal around the air conditioner on the inside and the
outside.
A
NOTE: Allow for removal of the air conditioner at a later time
for routine annual maintenance.
B
WARNING
C
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
A.Top of wall opening
B.Top channelDo not remove ground prong.
C.Air conditioner
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
2. Plug into a grounded 3 prong outlet.
3. Press RESET on the power supply cord plug.
4. If the bottom of the air conditioner does not sit against the
?
bottom of the SMART-MOUNT tray, remove air conditioner
14 |
ACEC
