Before starting
c
your dishwasher
1. Spin the Upper Spray Arm to make sure
nothing will stop it from turning freely.
2. Close and latch the door.
3. Run hot water at sink nearest dishwasher
until it is hot. Turn it off. (See page 14 for
connecting instructions.)
CLEAN SELECTOR BUTTONS
Starting your dishwasher
POTS 81 PANS Cycle... HEAVY WASH Cycle...
1. Make sure Cycle Control Knob points 1. Make sure Cycle Control Knob points
to dot marked POTS & PANS. to dot marked HEAVY WASH..
2. Push POTS & PANS Clean Selector 2. Push HEAVY WASH button.
Button. 3. Push button for option desired.
3. Push button for option desired. 4. Without turning it, pull out the Cycle
4. Without turning it, pull out the Cycle Control Knob to start the cycle.
Control Knob to start the cycle.
NORMAL WASH Cycle... RINSE & HOLD Cycle...
1. Turn Cycle Control Knob clockwise until 1. Push NORMAL WASH button.
it stops at dot marked NORMAL WASH. 2. Select AIR DRY OPTION only. Do not use
2. Push NORMAL WASH button. HI-TEMP WASHING Option.
3. Push button for option desired. 3. Turn Cycle Control Knob clockwise to
dot marked RINSE & HOLD.
4. Without turning it, pull out the Cycle Con-
troi Knob to start the cycle. 4. Close and latch the door to start the
cycle.
Changing a setting 2. With the Cycle Control Knob pulled out,
You can change a setting anytime during turn clockwise to the cycle you want.
any cycle. 3. Be sure the detergent dispensers are filled
1. Unlatch the door to stop the cycle, but don?t properly for the new cycle.
open it until the spray arms stop spinning. 4. Latch the door to start the cycle.
4. Close the door. Do not latch it. Wait 30 sec-
To add a dish after starting
onds for air in the dishwasher to warm UD.
1. To be sure the added item is washed and This helps reduce the amount of moisture
rinsed, make sure the Cycle Control Knob that can come from the vent when restart-
has not passed NORMAL WASH. ing the cycle.
2. Unlatch the doorto stop the cycle. 5. Latch the door. The dishwasher will start
3. Open the door and add the dish. from where it stopped.
HI-TEMP WASHING Option
When this option is selected, water for the rinsing action in those parts of the cycle will
main wash and the final rinse is heated [except be longer if the water is heated. HI-TEMP wash-
in RINSE & HOLD) to 145?F (63-C). Washing and ing is automatic in POTS & PANS.
8 |
ACEC
